Modelling punch B

Puch with 3 different diameters:
3,5mm, 4mm, 5mm

This set is a punch set that includes punches in three different diameters: 3.5 mm, 4mm and 5 mm. This is basically the big set. You are supposed to use a hammer on these to punch a hole, but it could be used by hand.

Selecting a piece of rather thick plastic card, .8mm/.030inches I set it down on some paper and started twisting it. I used the 2mm tip. The end is quite sharp as I was able to cut through the plastic and several sheets of paper rather easily.

This would be extremely useful in building instrument panels in various scales as well as any time one needs a disc for a project.