Albatros DIII OEFAG in Polish Service

Albatros D.III Oeffag 153/253 Austro-Hungarian

The Oeffag aircraft were built in three main versions (series 53.2, 153, 253) using the 138, 149, or 168 kW (185, 200, or 225 hp) Austro-Daimler engines respectively. All Oeffag variants were armed with two 8 mm (.315 in) Schwarzlose machine guns. In most aircraft, the guns were buried in the fuselage, where they were inaccessible to the pilot. In service, the Schwarzlose proved to be somewhat less reliable than the 7.92 mm.

Kit-set contains:

Resin Casting Parts:

Fuselage, wings (steel wire reinforced), horizontal and vertical fins, ailerons, tail wings

3D printed parts:

Full Interior, propellers, guns (2 pcs.), undercarriage.

All struts, strong ABS resin printed with holes to easier connect parts with wire.

3D printed parts packed in an additional box to ensure maximum protection.

- photo-etched parts

- steel (1.2mm) and copper wires (0.8, 0.5, 0.3mm)

- Windscreen - PE+film

- Decals 5 schemes

- Colored instructions