B737 Overhead Panel Instrument set (GSA-055 usb interfase required)

B737 Overhead Panel Instrument set. Compatibility: Windows XP, Windows Vista, Windows 7, Windows 10. FS2004, FSX, FSXSTEAM, P3D, XPlane Prosim737, Project Magenta GSA-055 Central Interface Module required, ( NOT INCLUDED ) Important ! The 7 gauges are daisy chained to a separate Central interface module. (if used with other FI gauges, you will need a second interface) B737 Overhead Panel Instrument Package with CIM. The Overhead gauges package consists of 7 instruments as found in the B737. 1 x Bleed air duct pressure indicator (dual needle) 1 x Oxigen pressure 1 x Cabin altimeter and differential pressure indicator (dual needle) 1 x Cabin rate of climb indicator 1 x APU exhaust gas temperature (EGT) indicator 1 x Fuel temperature indicator 1 x Temperature indicator The 7 gauges are daisy chained to the Central interface module. Most gauges are based on proven single needle technology. The Cabin altimeter and differential pressure indicator is a single shaft dual needle gauge which we are developping at this moment. There is no reason why a simulated instrument like a gauge must have the same dimension as the actual gauge. With stepper motor driven G-STEP technology our gauges have a depth of approx. 1 inch or 25 mm. This reduces dramatically the depth of your panel and allows for easy access and maintenance. Furthermore it reduces the prices, because there is no housing. Absolutely no programming. Not one single line of code. Just assign a gauge, a switch, a led to the respective Flight Simulator function, which can be an instrument, a switch position or an annunciator light. The calibration of each gauge is performed once in our software and is automaticly with each start of FS. Daisy chained instruments: Because your cable goes directly into any next gauge, you don't need a cluttering of cables from each instrument to the central control unit. With the daisy chained instruments, you simply connect 1 instrument with the Central Interface board. Spagetti times behind your panel are over. G-STEP® technology: Flight Illusion created this G-STEP® technology in order to overcome jerky movements and offer an acceptable solution for spacing. By using stepper motor instead of servo motors, the G-STEP® gauges are moving in exactly the same way as when seen on the panel on screen. Each full rotation of a needle is divided into 1080 steps, resulting in a smooth and precise indication with an extreemly quick response time. And in crucial phases of your flight, this might be very important. IMPORTANT: Warm white backlight

For more information: Driver and Program software and Manuals download page