Collect Megapoints for Megavouchers
Read the conditions...
Aviation Megastore offers unique Hold & Store service © for internet customers that wish to combine several individual orders to one single shipment, reducing the overall shipping cost significantly.
Publisher/Brand Phidgets US
Category Flight Simulation
Subcategory B737NG Accessories Phidgets
Availability In stock
This product was added to our database on Wednesday 22 March 2006.
Your reliable Aviation Gift Source since 1989
Mind: cockpit controls and instruments are delicate equipment intended for careful private use. Damage or functional failures as a result of negligent or careless handling of these equipment, or as a result of commercial application will not qualify for any warranty.
Product: InterfaceKit 0/16/16
Description: 0/16/16 Phidget Interface Kit
One of the most requested versions of our interface kits, a perfect companion used together with Project Magenta pmSystems Overhead software to assign all I/O functions.
16 Digital Inputs and 16 Digital Outputs
Each input/output has an LED indicator which maked wiring very easy.
Inputs are activated by 4 to 30 Volt signal. Outputs sink up to 30V at 2A. The outputs do not provide power they just act as switch to ground.
16 Digital Inputs
These inputs require that an external voltage source supply the power to input. A voltage of 4 to 30VDC will be read as a high or logical 1, below 3VDC will be read as a low or logical 0. The input is high impedance which means the current will be limited. The refresh rate is 125Hz for the Digital Input.
16 Digital Outputs
These outputs require that an external voltage source supply the power. The outputs can sink up to 30VDC at 2A. This type of output is commonly referred to as "low side switching" The Digital Outputs have a refresh rate of approximately 125Hz.
NO Analog Inputs
Comes packaged with a 6' USB Cable.
This InterfaceKit could be used in projects that need to turn on/off larger loads: incandescent lights - relays - solenoids - motors - etc.
Board Dimensions: 8.1 x 11.7 cm
Mounting Holes: 3.8 x 10.9 cm